Info
Info

Mercedes-Benz launches PHEV versions of A and B-Class

News

Plug-in hybrids are an important milestone on the road to zero-emissions driving.

Info

Mercedes‑Benz Cars is pushing ahead with the development of
its plug-in hybrids under the EQ Power label. With the A 250 e, A 250 e Saloon and B 250 e models from the compact-car family with the third-generation hybrid drive are now celebrating their premiere. The A 250 e and A 250 e Saloon can be ordered now at prices from €36,943.55 ($41,007) and €37,300.55 ($41,404). Sale of the B 250 e starts a few weeks later. Market launch of the models will take place this year. The EQ Power for the A- and B-Class underscores Mercedes-Benz's plug-in initiative: the company aims to extend its offering to more than 20 model variants by 2020.

The vehicles belonging to Mercedes-Benz's compact car family feature transversely mounted engines. A compact hybrid traction head has been developed for the 8F-DCT dual clutch transmission which follows the same technical principles as the corresponding component on the vehicles with a longitudinally installed engine. It is a permanently excited synchronous machine as an internal rotor. The stator is permanently integrated in the traction head housing, while the low-loss wet clutch is incorporated in the electric machine's rotor. On-demand stator and rotor cooling allow use of the electric motor's peak and continuous output without any problems.

For the first time on a Mercedes-Benz vehicle, the combustion engine is started by the electric motor - the compact hybrids do not have a separate 12-volt starter.

The electric machine achieves 75 kW. Together with the 1.33-litre four-cylinder engine this adds up to a system output of 160 kW (218 hp) and a system torque of 450 Nm. Thanks to the EQ Power of the electric machine the A 250 e and B 250 e react immediately to a step on the accelerator, and the performance is impressive: the A 250 e, for example, requires 6.6 seconds for the sprint from 0 to 100 km/h, and its top speed is 235 km/h.

A lithium-ion high-voltage battery with a total capacity of approx. 15.6 kWh is used as an electric energy storage unit. It can be charged at an external electric energy source. The A 250 e and B 250 e can be charged with alternating or direct current. A corresponding vehicle socket is located in the right-hand side wall of the vehicles. This means that the compact plug-in hybrids can be charged at a 7.4 kW Wallbox with alternating current (AC) within 1 h 45 min from 10-100 percent SoC (Status of Charge). For direct-current charging (DC) the battery can be charged from 10 - 80% SoC in around 25 minutes.

The batteries are supplied by the wholly owned Daimler subsidiary Deutsche ACCUMOTIVE. The high-voltage battery is water-cooled and weighs approx. 150 kg.

An innovative exhaust system enables ingenious packaging: rather than extending to the end of the vehicle, the exhaust ends in a centrally positioned outlet under the vehicle floor, with the rear silencer housed in the transmission tunnel. Integrating the fuel tank into the axle installation space creates room beneath the rear seats for the high-voltage battery. This results in only minimal reduction in boot capacity for the A 250 e and B 250 e compared to the sister models without hybrid engines.

Because the compact vehicles use third-generation plug-in technology, all of their functions are also available. These include in particular the intelligent, route-based operating strategy, taking factors such as navigation data, speed regulations and route into account. The operating strategy takes into account the entire planned route and prioritises the electric driving mode for the most sensible route sections in each case.

With the launch of MBUX (Mercedes-Benz User Experience) the previous plug-in operating modes of all EQ Power models have been converted to drive programmess. That means that in every Mercedes-Benz plug-in hybrid the new drive programmes “Electric” and “Battery Level” are available. This is the case from the outset for the compact models.

Maximum e-performance can be experienced in “Electric”. The combustion engine is only engaged if the driver uses kickdown on the accelerator pedal. In the “Electric” programme the recuperation strength can also be selected via paddles behind the steering wheel. The paddles on the steering wheel enable the selection of five different recuperation levels (DAUTO, D+, D, D- and D).

Comfort, ECO and Sport modes are also available. According to the given requirements, the driver is thus able to give priority to electric driving, place the emphasis on driving dynamics in combined drive mode or give preference to combustion mode in order to save electric range, for example.

A key comfort feature is pre-entry climate control before the vehicle is started, because the A 250 e and B 250 e have an electric refrigerant compressor. The pre-entry climate control can also be activated conveniently by smartphone. The trailer load of the compact hybrids is impressive at 1600 kg (braked).

As well as using the domestic power supply, e.g. at a Mercedes-Benz Wallbox, convenient and uncomplicated charging is possible during the journey, too. That's because the MBUX infotainment system (Mercedes-Benz User Experience) assists the driver in finding charging stations. The MBUX system understands natural speech, allowing the driver to start a search simply by saying “Hey Mercedes, find charging stations nearby”. Via Mercedes me Charge, drivers of a plug-in hybrid model can optionally obtain access to one of the world's largest charging networks, with over 300 different operators in Europe alone (municipalities, car parks, motorways, shopping centres, etc.).

Plug-in hybrids offer customers the best of both worlds: in town they run in all-electric mode, while on long journeys they benefit from the range of the combustion engine. They make the vehicle more efficient overall because they can firstly recover energy during braking and secondly allow the combustion engine to run in favourable operating ranges. EQ Power also provides for highly dynamic performance. EQ Power+ stands for the high-performance hybrid technology which Mercedes‑AMG is already applying with success in Formula 1 and which it will be deploying on the road in future.

By the end of 2019 Mercedes-Benz will have more than ten plug-in hybrids in the range - an attractive portfolio from the compact car to the flagship Mercedes-Benz S-Class. The aim is to be able to offer customers well over 20 model variants in 2020.

The new plug-in hybrids of the S-, E- and C-Class with electric ranges of up to 50 km in accordance with NEDC were unveiled last year. In the C- and E-Class, Mercedes-Benz is the only manufacturer to combine the diesel engine with plug-in technology, offering this set-up in the Saloon and Estate versions of these two model series. The update of the GLC with EQ Power is already in the starting blocks.

Also equipped with the third-generation hybrid drivetrain, it provides the point of entry to the SUV segment. The next member of the EQ Power family will be the GLE - with a planned range of around 100 km, it points the way to an even more powerful electric driving experience.


The Latest News, Brought To You By
Mercedes-Benz launches PHEV versions of A and B-Class
Modified on Monday 19th August 2019
Find all articles related to:
Mercedes-Benz launches PHEV versions of A and B-Class
TaaS Technology Magazine
Info
Faraday Future Selects Velodyne As Exclusive Lidar Supplier For Flagship FF 91
EasyMile Raises €55 Million In Series B Round
Gilbarco Veeder-Root Expands E-mobility Platform With Launch Of EVerse
Faction Raises $4.3M To Develop Light EV Driverless Fleets
GHD Survey Reveals Half Of British Consumers Are Considering An Electric Vehicle In Next Five Years
European Launch: NIO To Sell Smart Premium EVs In Norway
Ford Boosts Investment In Solid Power
Renault Group And Plug Power Inc. Launch HYVIA
Dr. Matthias Jurytko Takes Over The Management Of The Fuel Cell Joint Venture Cellcentric
Pininfarina And MT Distribution Join Forces To Create A New Range Of Vehicles For Urban Electric Micro-mobility
Construction Begins On First-of-its-kind Electric Vehicle Battery Technology Centre And Pilot Line
Toshiba Expands Scope Of Its Solid-State LiDAR Solution To Address Transportation Infrastructure Monitoring
Uber, Mobilize, RATP And Blablacar Join Forces For Sustainable Mobility By Launching The “Mobilité360” Project
AAM And REE Automotive To Jointly Develop New Electric Propulsion System
Nano One And Johnson Matthey Enter Into A Joint Development Agreement For Lithium-ion Battery Materials
Iteris Awarded $3.3 Million Contract By City Of Modesto For Smart Mobility Initiative
PCB Depaneling: Laser Technology Improves Quality And Efficiency For Automotive Applications
HELLA Brings Latest Passenger Car 77GHz Radar Technology Into Series Production
Nikola And Total Transportation Services Inc. Sign LOI For 100 Nikola Trucks
FEV Successful In Designing Low Emission, Efficient Hydrogen Internal Combustion Engine
Former Google Head Of Energy Strategy Neha Palmer Joins TeraWatt Infrastructure
Daimler Truck AG And Volvo Group Fully Committed To Hydrogen-based Fuel-cells – Launch Of New Joint Venture Cellcentric
Fisker Launches Resource For Environmental, Social, And Governance Policy, Practices And Reporting And
SEAT Introduces Autonomous Mobile Robots In Its Barcelona Factory
Info
Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
×
Logo
×
Register - Step 1

You may choose to subscribe to the TaaS Magazine, the TaaS Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification} Array
Live Event